Quick answer: A smart deadbolt can match an existing bore and backset yet fail to fit beside interior trim, a lever or a storm-door arrangement. Check the complete interior motor housing, exterior keypad and battery-cover access after confirming the door preparation. Hole compatibility is necessary but incomplete.

Confirm the door preparation first
Find the exact lock model’s door-preparation and installation documents. Measure door thickness, cross-bore and edge-bore sizes, backset and the existing strike arrangement using the specified references. Do not assume that the old latch working proves the door is prepared for the new lock.
For example, Schlage’s cited Encode Plus specification lists an adjustable backset of 2⅜ or 2¾ in. Those are 60.325 and 69.85 mm by exact conversion, often described nominally as 60 and 70 mm. The two positions differ by ⅜ in, or 9.525 mm. This is a specific product example, not a universal smart-lock range.
Compare the housing with nearby objects
Obtain the interior and exterior dimensional drawings, including offsets from the bore centre. Measure to the nearest trim, glass bead, lever and any second lock at their actual heights. A housing may not be centred symmetrically around the bore.
As a hypothetical example, a housing extending 37.5 mm toward trim that is only 35 mm from the same reference conflicts by 2.5 mm. A matching bore cannot resolve that collision. Do not plane structural trim, alter the lock case or change a template to force installation without an approved plan.
- Door preparation within the exact model’s requirements.
- Housing offsets clear trim and neighbouring hardware.
- Battery cover can be removed and controls reached.
- Door and any storm door clear the exterior projection.
- Latch/bolt and strike align as the installation instructions require.
Keep operating effort separate from physical fit
A device can sit flush while a misaligned door makes the bolt bind. Follow the manufacturer’s checks and have a locksmith assess unresolved alignment or door preparation. Do not rely on the motor to overcome a sticking door.
Also check the exact lock’s weather exposure and supporting-door requirements. An interior housing dimension does not establish suitability for an exposed outdoor gate or a different door material.
Common questions
Does the same backset guarantee a replacement? No. Bore dimensions, thickness, housing and strike arrangement remain separate.
Can I use the supplied paper template for another model? No. Use the exact product’s template and revision.
Where should I begin with ordinary door measurements? See our door-knob measuring guide, then apply the smart lock’s own requirements.
Official sources and scope
Checked October 20, 2026: Schlage Encode Plus Century specifications and Schlage Encode existing-hole preparation example. These are different named product documents; use the manual matching the purchased lock. Housing examples are hypothetical; no firsthand installation or security-performance test is claimed.



