Result — No as a direct size match. A 10 mm grip-ring stem and an 11 mm grip-ring stem are different fittings, even when both are 22 mm long. Match the chair’s specified interface and measure the removed stem before selecting a caster set.

Measure the metal stem, not the wheel
The Office Oasis lists its regular replacement set with an 11 mm diameter × 22 mm long grip-ring stem. Its separate IKEA-size product lists 10 mm × 22 mm. The equal length does not erase the diameter difference. The regular product also explicitly excludes IKEA chairs; treat the separate variant as a different fitting.
First check the chair maker’s replacement-parts guidance. A threaded stem, plate mount or another retention system is a different interface altogether. Do not begin with a claim that a large wheel is “universal.” The part entering the chair base determines the first compatibility check.
| Feature | What to compare | Reason |
|---|---|---|
| Stem diameter | 10 mm or 11 mm, as specified | A 1 mm diameter difference is not a tolerance |
| Stem length | 22 mm on these two variants | Equal length alone is insufficient |
| Retention | Grip ring versus another interface | The intended lock must engage |
| Installed height | Old and new complete caster height | Seat and desk relationship may change |
Use calipers on an undamaged sample
Support the chair in the manner its instructions allow and remove a caster using the specified method. Measure across the smooth metal shaft with calipers, keeping the jaws square. Do not measure only the projecting retaining ring or a plastic sleeve left in the base. Record the metal stem’s working length and photograph the retention shape.
If a bushing comes out with the old caster, identify it before choosing a size. A worn socket or a missing sleeve can make an incorrect wheel appear to slide in. Ask the chair maker for the correct part when the assembly differs from the instructions.
Do not force a larger stem into a smaller socket
An 11 mm stem is 1 mm larger in diameter than a 10 mm stem. That is a nominal dimension comparison, not permission to drill, hammer or stretch the chair base. Conversely, a smaller stem that enters loosely has not achieved the designed retention. Reject a wobbling or incompletely seated fitting.
Install only a compatible complete set using the required seating and retention checks. Do not sit on the chair to force uncertain stems into place. Inspect the base for damage and confirm each wheel swivels normally before normal use.
Check the chair after changing wheel height
Measure the seat’s new lowest position against your feet and desk. Larger casters can raise a chair even though the stem is correct. Check the base, foot ring, nearby furniture and floor for clearance throughout the caster’s swivel movement.
The caster manufacturer’s 650 lb figure is for its set of five. It does not increase the chair’s own rating. Use the lowest applicable limit and the chair’s approved configuration. A stem match, stable installation and usable seat height are separate requirements for a successful replacement.
Before you decide
- Identify the chair’s approved caster interface.
- Measure smooth stem diameter, working length and retention type.
- Reject forced insertion, loose retention and damaged sockets.
- Check complete-set seating, seat height, swivel space and chair load limit.
FAQ
Does 22 mm length make both stems interchangeable?
No. Diameter and retention must match as well as length.
Does the caster set’s load rating raise the chair rating?
No. The complete chair remains subject to its own manufacturer’s limit.
Official sources and scope
Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.
- Office Oasis regular 11 × 22 mm caster specifications
- Office Oasis separate 10 × 22 mm IKEA-size specifications



