SKRUVBY Cabinet Fit: 5 Practical Alcove and Door Checks

SKRUVBY Cabinet Fit diagram showing the closed footprint and space to check for opening the doors

Fit verdict: SKRUVBY Cabinet Fit starts with a 27 1/2-inch width, 14 3/4-inch depth, and 35 3/8-inch height for IKEA US article 205.035.47. Those closed dimensions can establish whether the cabinet enters an alcove, but they do not establish whether its doors open usefully there. Check the narrowest opening, the front access area, and the required anchoring position before ordering.

SKRUVBY Cabinet Fit diagram showing the closed footprint and space to check for opening the doors
Original Will It Fit Here planning illustration, not to scale. Published specifications and hypothetical examples are distinguished in the text; no firsthand fit test is claimed.

This is a specification-based planning guide, not a hands-on review. Room measurements and calculations below are hypothetical; your doors, trim, and stored objects need their own measurements.

SKRUVBY Cabinet Fit: dimensions that matter

Measurement Official specification
Exact cabinet SKRUVBY with doors, white, 205.035.47
Outside width × depth 27 1/2 × 14 3/4 in
Outside height 35 3/8 in
Published maximum load per shelf 33 lb
Shelf configuration Two movable shelves
Delivery package, length × width × height 36 1/2 × 15 1/4 × 6 1/4 in

1. Measure the opening at three heights

Take the alcove width near the floor, at the cabinet top, and across any projecting trim. Use the smallest result. A gap between plaster walls may be wider than the opening between baseboards, and a decorative window sill can narrow the space above them. Measure usable depth from the foremost rear obstruction, not automatically from the wall surface. Record the position of sockets and plugs without assuming that they can be crushed behind the back panel.

For SKRUVBY Cabinet Fit, draw the outside rectangle on the floor before considering what goes inside. Mark the front edge clearly so that an apparently shallow cabinet does not quietly take space from a doorway.

2. Test access with the doors open

Allow for each door and handle to move without hitting an alcove return, neighboring furniture, or a room door. The published cabinet width is not a published door-swing radius. Use the assembly drawing or a showroom measurement to establish hinge location, leaf width, and handle projection. A cardboard mock-up is useful once those dimensions are known. Do not assume that leaving a tiny gap on each side guarantees useful opening.

Also rehearse the task: stand in front, open the doors, and lift out your widest box. A person can need more space than the moving door alone. Keep the room’s access route usable rather than assigning all remaining floor area to storage.

3. Compare stored objects with the interior

SKRUVBY Cabinet Fit for baskets or dinnerware needs interior measurements. The outside depth includes structure and the doors, so it is not a promise of a 14 3/4-inch-deep shelf. Measure between the actual boundaries and check whether hinges reduce the entry opening. Include basket handles and any lip that must pass through the doorway. For stacked items, leave room to grip and lift the top piece rather than filling every fraction of an inch.

4. Plan anchoring before filling the cabinet

IKEA requires this cabinet to be securely anchored. Check that the intended wall location can accept the supplied restraint arrangement with appropriate fasteners for the wall material. Baseboards, cables, or unusual wall construction can complicate the position. Follow the installation documents and get qualified help when the fixing method is uncertain. A snug alcove does not replace the anchoring requirement, and loading the bottom heavily is not a substitute either.

Keep the shelf load limit separate from the dimensional check. A collection may fit by volume yet exceed a shelf’s rating. Do not treat that rating as permission to concentrate all weight on a tiny support point.

5. Check assembly and delivery access

The flat pack has a different shape from the finished cabinet. Measure narrow turns, stair landings, and the space needed to set the package down. Identify an assembly area where the panels can be laid out without blocking the route to the final position. Avoid planning an installation that requires assembling the cabinet inside a nearly exact-size opening with no room to reach fixings. Review the instructions before deciding the assembly order.

A worked alcove calculation

Suppose an opening measures 29 inches between baseboards and 16 inches from the rear obstruction to the desired front line. Subtracting the cabinet gives 29 − 27.5 = 1.5 inches total width allowance, or 0.75 inch on each side if centered. Depth allowance is 16 − 14.75 = 1.25 inches. These numbers describe a possible closed position only.

If a shelf above is 36 inches from the floor, the nominal height allowance is 36 − 35.375 = 0.625 inch. That tight result warrants checking floor level and assembly access. SKRUVBY Cabinet Fit is still unresolved until the doors and wall restraint can function in the proposed location.

Before you decide

  • Confirm article 205.035.47 rather than the wider sideboard.
  • Measure between trim, not just between wall surfaces.
  • Verify door and handle movement with real hinge geometry.
  • Check interior dimensions and each shelf’s load.
  • Plan anchoring, delivery, and assembly access together.

FAQ

Will a 28-inch-wide gap work?

It leaves only half an inch in total against the published width. SKRUVBY Cabinet Fit at that tolerance cannot be confirmed without checking trim, actual installation conditions, and door movement.

Can I use the outside depth to choose storage bins?

No. Measure the shelf and clear doorway. Structural panels, hinges, and the door reduce the usable envelope.

Does a tight alcove remove the anchoring requirement?

No. SKRUVBY Cabinet Fit includes the restraint installation required by IKEA, even when the surrounding walls look close.

Related fit guides

For another compact storage unit, see BISSA shoe-cabinet access checks. For understanding hinge measurements, see cabinet hinge sizes and mounting details.

Official sources

Specifications checked November 6, 2026. Confirm the exact article number and current installation instructions before purchase.