NORDKISA Dressing Table Fit depends on the chair, drawer access and mirror arrangement as much as the bamboo tabletop. A small vanity can fit neatly between two walls while leaving too little room to sit comfortably or retrieve cosmetics. This guide covers IKEA’s US dressing table, article 204.394.72, and shows how to test a compact bedroom position without inventing missing dimensions.
NORDKISA Dressing Table Fit: the quick verdict
The published footprint can work in a shallow space, but the usable seating opening must be measured separately. IKEA describes the drawer as accessible from both sides. Your placement determines which access is practical. The examples here are hypothetical calculations, not an installation test or a promise that any particular chair will fit.

| Item | Dimension |
|---|---|
| Table width | 29⅞ inches |
| Table depth | 18½ inches |
| Table height | 29⅞ inches |
| Hypothetical alcove width | 36 inches |
| Remaining total width | 6⅛ inches |
1. Check the whole alcove
Measure the opening at floor, tabletop and mirror heights. Skirting boards may narrow the leg area while a window sill intrudes higher up. Start the depth measurement at the furthest obstruction, not an imagined flat wall behind the trim. Record sockets and switches before deciding where the table should sit.
In the hypothetical 36-inch alcove, the width difference is 6⅛ inches. Centering the table would distribute that as 3¹⁄₁₆ inches on either side. This is useful arithmetic for NORDKISA Dressing Table Fit, but it does not establish room for a hand, a drawer movement or an adjacent cabinet door.
2. Measure the chair opening independently
The overall table height does not equal clear knee height. The drawer and supporting pieces occupy space below the top. Measure the lowest obstruction above your thighs, the clear distance between the legs, and any crosspiece that could meet your feet. Check these against the actual chair rather than a generic seat-height rule.
For example, a hypothetical 24-inch-wide chair cannot be approved simply because the table is almost 30 inches wide. The legs reduce the opening, and armrests may sit above the usable underside. Sit in the intended chair with your normal posture and reproduce the underside height with cardboard before committing to the arrangement.
3. Decide how the drawer will be used
Two-sided drawer access is most useful when you plan both sides of the table. Against a wall, one side may be unavailable. Freestanding, a person or another piece of furniture may occupy the second access path. Inspect the actual direction of travel and full extension rather than guessing from the tabletop depth.
A complete NORDKISA Dressing Table Fit check includes the objects inside. Measure a makeup organizer at its widest rim, and account for fingers needed to lift it. Do not use the external dimensions as the drawer’s internal capacity, and do not assume every organizer will clear the opening when the drawer is partly extended.
4. Add the mirror and everyday items
Place a paper outline of your mirror base, tray and lamp on an 18½-inch-deep mock tabletop. A mirror’s stated height may exclude a projecting base or adjustment movement. Check the combination from a seated position so the mirror remains useful without having to lean across your toiletries.
If electrical items are part of the setup, follow their own instructions and check cable routes separately. A dressing table that physically holds an appliance does not automatically provide an approved heat-resistant work surface. Keep cords out of the drawer movement and the chair’s route, and retain access to the outlet.
5. Test the occupied bedroom layout
Tape the table footprint, pull out the actual chair, and open the bedroom and wardrobe doors. NORDKISA Dressing Table Fit should be assessed while someone is sitting there, not only while the chair is tucked away. Try standing up, turning toward the wardrobe and carrying a laundry basket past the position.
IKEA lists the flat package at approximately 32¼ by 19¾ by 3½ inches. Check that carton against delivery restrictions, then allow a suitable assembly area. Package thickness is unrelated to how much operating room the completed vanity needs.
Before-you-buy checklist
- Measure the alcove at several heights.
- Verify the real knee opening and chair arm height.
- Observe the drawer’s actual movement on both sides.
- Mock up the mirror, lamp and organizer together.
- Rehearse sitting, standing and nearby door operation.
FAQ
Will a standard office chair fit underneath?
There is no single standard that guarantees it. Compare the chair’s arms and width with the measured underside opening.
Can the table stand away from the wall?
IKEA describes a freestanding placement option. Follow its assembly instructions and verify drawer access and stability in your chosen arrangement.
What settles NORDKISA Dressing Table Fit?
A measured footprint plus a successful chair-and-drawer mock-up is more useful than nominal width alone. Verify missing dimensions on the actual item.
Related fit guides
See bedroom desk and chair clearance for occupied-room planning, and VITTSJO laptop table fit for another shallow work surface.
Official source
Checked November 5, 2026: IKEA NORDKISA dressing table specifications and documents. Regional versions and product availability can change.



