Fit verdict: The IKEA MALA paper roll listed as article 704.610.88 measures 45 cm wide, with an 8 cm outside diameter and a 3 cm inside diameter. IKEA identifies it for use with the MALA easel. For a different easel or tabletop holder, width, core fit and clearance around a fresh full roll all need to match.

Dimensions and conditions
| Check | Reference | What it means |
|---|---|---|
| Roll width | 45 cm | Check the space between holder supports |
| Full-roll outside diameter | 8 cm | Allow free rotation around the whole roll |
| Core inside diameter | 3 cm | Compare with the holder rod |
| Paper length | 30 m | Length does not establish holder compatibility |
1. Measure the MALA paper roll support span
Check the clear space between the parts that retain the roll. The holder’s overall outside width is not the available space for paper. Include the end caps or collars that keep the roll on the spindle. A roll that can be placed on the rod but is squeezed at both ends may not turn freely. Also check the paper route across the drawing board or tabletop, especially if it passes under a retaining bar.
2. Compare the rod and full-roll envelope
The rod must pass through the core in the way the holder was designed to work. A nearly empty roll is a poor test for a replacement because its outside diameter is much smaller. Check the full circle around the spindle against the frame, board and wall behind it. Do not force a larger roll into a holder by removing a structural part. If the holder specifies a maximum diameter, use that limit rather than estimating from a photograph.
3. Check feeding, changing and storage
Pull a short section of paper through the normal route and check that the roll feeds evenly without rubbing. Plan how the spindle comes out when replacing the roll; a holder wedged between furniture may fit during use but have no removal path. Store spare rolls where they will stay clean and dry without distorting the paper edges. For children’s furniture, retain all original safety and assembly features and follow the easel’s age and use instructions.
4. Keep a MALA paper roll fit record
Keep three measurements beside the holder's model name: clear support span, spindle diameter and the largest roll diameter permitted by its instructions. Record where the spindle must slide during replacement. These notes are more useful than a generic label such as large paper roll, especially when buying a refill from a supplier that uses a different core or paper width.
MALA paper roll: a worked fit example
Illustrative check: a holder with 44 cm of clear space between its retaining supports cannot accept a 45 cm-wide roll in that position. A rod that fits the 3 cm core does not solve the width conflict. Conversely, a sufficiently wide holder may still fail if a new 8 cm-diameter roll touches its rear crossbar.
Before you decide: 5 checks
- Match the exact roll specification.
- Measure clear span between retaining supports.
- Compare spindle fit with the core opening.
- Check the full-roll diameter against nearby parts.
- Test paper feed and the replacement path.
FAQ
Is 30 m the size that determines fit?
No. It is paper length; width, core and roll diameter determine the physical holder fit.
Can an empty roll prove a fresh roll fits?
No. A full roll has a larger outside diameter.
Does IKEA claim it fits every easel?
The cited product page identifies use with the MALA easel, not universal compatibility.
Related fit guides
- IKEA NORRAVA Lid Fit: 5 RASKOG Checks
- How to Measure for Sofa Delivery: Doors, Corners and Stairs
- Furniture fit guides
Sources
Sources checked 3 November 2026. Product-specific facts are attributed above. Worked examples and measuring methods are planning guidance; example dimensions are not product specifications. Recheck the exact model or current travel policy before acting.



