Fit verdict: The IKEA HEMNES daybed is designed around two twin mattresses: stacked for single-bed use and side by side when the base is pulled out. A single mattress purchase or an assumed standard size can leave the conversion plan incomplete.
This guide uses the US white HEMNES frame 303.493.29 and the linked ÅSVANG combination. Regional mattress sizes and HEMNES variants can differ. Match the mattress measurements to your exact frame rather than importing a different market’s twin label.

Dimensions and conditions
| Check | Official reference | What to verify |
|---|---|---|
| Required arrangement | Two twin mattresses | Stacked for single use; side by side for double use. |
| Listed mattress size | 38 1/4 × 74 1/2 in each | Compare the actual specified mattress pair. |
| Closed outside frame | 78 3/8 × 41 3/8 in | This is room footprint, not mattress size. |
| Extended bed width | 76 3/4 in | Leave room for conversion and normal access. |
| ÅSVANG example thickness | 4 3/4 in each | Other mattresses need a fresh stacked-height check. |
1. Match the IKEA HEMNES daybed mattress pair
Start with the exact frame article and its current regional mattress specification. IKEA explicitly describes two mattresses, one above the other in single configuration and next to each other in double configuration. Do not assume that any item sold as twin has identical outside measurements or compresses in the same way. Compare length, width and thickness for both mattresses and keep the pair consistent with the frame’s intended arrangement.
2. Check the stacked height before choosing bedding
Two mattresses create a different sitting and sleeping height from one. The linked ÅSVANG example is 4 3/4 inches thick per mattress, so two nominal layers total 9 1/2 inches before bedding; that is simple addition, not a measured loaded height. Test how the intended bedding, cushions and fitted sheets work with the frame and the user’s access. Do not infer a maximum permitted mattress thickness from that example or from a photograph.
3. Reserve the extended footprint and conversion movement
Mark the closed frame outline, then mark the published extended bed width on the floor. Check the nearby desk, bedside table and walkway when the base is pulled out. Include the space needed to move the upper mattress across without trapping it against furniture. IKEA says the pulled-out frame is used as a double bed, not two separate single beds. Plan drawers and bedding access separately instead of assuming every function remains available in the same room position.
Before you decide: 5 checks
- Confirm your regional frame and mattress article numbers.
- Check both mattress lengths, widths and thicknesses.
- Consider the stacked height with the intended bedding.
- Mark the closed and extended frame outlines in the room.
- Practise the instructed conversion and check access around the double bed.
Keep a short IKEA HEMNES daybed fit record with the exact product or service identity, the official rule you checked and the measurements from your own setup. Mark anything you could not verify as unresolved. Recheck the record if the product, accessories, route or surrounding space changes; an earlier fit result belongs to the configuration that was actually checked.
FAQ
Does the IKEA HEMNES daybed require two mattresses?
IKEA’s product instructions say to combine the daybed with two twin mattresses for its stacked and side-by-side arrangements.
Is one thick mattress equivalent to two thin ones?
It does not provide the same two-mattress conversion. Verify any alternative with IKEA for the exact frame.
Can I pull it apart into two single beds?
IKEA says it is not to be used as two single beds; the pulled-out configuration is a double bed.
Related fit guides
Continue with IKEA ELVARLI Fit: 5 Ceiling-Post Planning Checks or browse Furniture fit guides. Check each item against its own specifications; a related guide does not establish this product’s compatibility.
Official sources
Sources checked 27 October 2026. Measurements and conditions are attributed above; room and packing checks are planning guidance. Recheck the current official instructions before purchase, installation or travel.



