How Much Storage Height Do Stacked Chairs Really Need?

Nested chair outlines distinguish the first chair height from hypothetical eight-centimetre increments and mark additional space needed to lift a chair off.

Quick answer: A stack’s height is not the single-chair height multiplied by the chair count. Measure the actual nesting increment and the complete stack envelope, then include the lift needed to add or remove a chair. Stack only as the manufacturer permits.

Nested chair outlines distinguish the first chair height from hypothetical eight-centimetre increments and mark additional space needed to lift a chair off.
Original Will It Fit Here explanatory diagram. Not a product photograph or firsthand measurement. Named specifications and hypothetical examples are distinguished in the article.

Separate chair size from stack size

The cited IKEA Portugal ADDE 902.142.85 is described as stackable and lists a single-chair width of 39 cm, depth of 47 cm and height of 77 cm. Those are not published dimensions for a four-chair stack. Its flat-pack carton is a third, different envelope.

Record the chosen model, any pads or accessories that remain attached, and the manufacturer’s stacking instructions or limits. Do not infer a safe stack count from the unused height in a cupboard.

Measure the nesting increment

On a suitable level surface, measure one chair and then a permitted pair in their proper nested position. The difference is the added height for that pair, not the full second-chair height. For a larger stack, verify the actual result rather than assuming every chair nests identically.

Hypothetical geometry Height
First chair 77 cm
Chosen illustrative nesting increment 8 cm per additional chair
Four-chair arithmetic 77 + 3 × 8 = 101 cm

The 8 cm increment and 101 cm result are hypothetical; they are not ADDE stack specifications or approval to stack four chairs. A leaning stack may also grow in depth and shift its uppermost point away from the footprint of the lowest chair.

Leave room to unstack

A 101 cm stack under a 105 cm shelf would leave only 4 cm vertically in that illustrative arrangement. That does not show that a chair can be lifted free. Check the required motion and hand access, plus the doorway and route through which the stack would be handled.

Store the stack where it cannot obstruct an exit or fall into a walkway. Do not climb on stacked chairs, wedge them against a wall to hold an unsupported arrangement or move a tall stack in a way the instructions do not permit. Ask the supplier for stack dimensions and handling guidance when storage space is tight.

Before you decide

  • Model explicitly permits stacking.
  • Permitted count and handling instructions confirmed.
  • Actual stack width, depth, height and lean measured.
  • Lift-off space, hands and clear route included.

Common questions

Can I multiply the chair height by four? That usually misses nesting; it also says nothing about a permitted stack count.

Does enough cupboard height prove usability? No. You need space to lift and remove a chair as well as room for the stationary stack.

Official sources and scope

Checked October 21, 2026: IKEA Portugal ADDE dimensions and stackable description. Confirm the exact product, route or current policy before acting. No firsthand fit test is claimed.

Related guide: Dining Chair Arms: 5 Useful Table-Fit Checks. This addresses a separate fit check; its measurements do not transfer to the products above.