Result — Conditional. An SFX power supply must match the case’s supported physical form factor and mounting arrangement. Corsair’s current SF750 is 100 × 125 × 63.5 mm in length, width and height; the compared RM850x is 160 × 150 × 86 mm. Both can advertise ATX 3.1 electrical compliance while having different physical envelopes.

1. Identify the SFX power supply and its specification
This guide compares Corsair SF750 SKU CP-9020284 with RM850x SKU CP-9020270 using their current manufacturer specifications. It does not transfer dimensions or cable arrangements from older models, SF-L products or RMx SHIFT variants. Write down the complete PSU and case models. The number in a wattage name describes an electrical output rating, not the chassis size. Likewise, electrical-standard terminology should not be used as a substitute for a physical form-factor check.
2. Dimensions: keep each manufacturer axis labelled
Corsair’s guides list the SF750 at 100 mm long, 125 mm wide and 63.5 mm high, versus 160 × 150 × 86 mm for the cited RM850x. Preserve those axes when drawing the case opening and cavity. A short ATX unit does not become an SFX unit just because one of its dimensions looks close. In this comparison, the RM850x is also wider and taller. Do not compare only the front-to-back depth while ignoring the mounting face and the surrounding case structure.
| Compared current product | SF750 CP-9020284 | RM850x CP-9020270 |
|---|---|---|
| Physical form factor | SFX | ATX |
| Length × width × height | 100 × 125 × 63.5 mm | 160 × 150 × 86 mm |
| Electrical standard cited | ATX12V 3.1 | ATX12V 3.1 |
| Modular cable family | Type 5 | Type 4 |
| Extra installed space | Approved bracket and cable route | Case support and cable route |
3. Confirm the intended bracket and support
Check the case manual for accepted PSU formats and any required bracket. A maker-approved SFX-to-ATX mounting arrangement can support a smaller PSU in a larger opening, but it does not establish the reverse fit of a larger ATX body in an SFX-only cavity. Verify the actual screw pattern, bracket orientation and support rather than leaving a unit resting on nearby components. A paper mounting-face template can help identify an obvious mismatch without opening or modifying the power supply.
4. Include plugs, cable routing and other components
The bare PSU depth excludes inserted modular connectors and the space required for cables to follow their permitted routes. Check the closest drive cage, graphics card, radiator or case panel behind the connector side. The usable route can change with another installed component, so measure the final planned configuration. Do not force the panel closed against a plug or bend a cable sharply to erase a geometric shortfall. Use the supplied or expressly compatible cables for the exact PSU model and revision.
5. Separate mechanical fit from electrical suitability
The current SF750 documentation identifies Type-5 Micro-Fit modular connectors, while the cited RM850x lists Type 4 cables. Do not mix modular cable sets based on a superficial resemblance. Confirm the power requirements and intended connections of the whole computer separately from the cavity measurements. Follow the PSU and case installation instructions with the equipment disconnected as directed. A correctly supported body and a closing side panel are useful mechanical checks, but they do not by themselves establish adequate electrical capacity or correct cabling.
Before you decide
- Record complete PSU and case models.
- Distinguish electrical ATX version from physical format.
- Check body dimensions, approved bracket and mounting face.
- Plan compatible cables and the full installed connection space.
FAQ
Does ATX 3.1 mean an ATX-size power supply?
No. The compared SFX model also lists that electrical standard. Check the physical form factor and dimensions.
Can a mounting adapter shrink an ATX body into an SFX cavity?
No. A bracket changes a specified mounting interface; it does not reduce the PSU’s width, height or length.
Official sources and scope
Checked on 23 October 2026. These references apply to the identified product, version and region. Follow its matching current instructions. Any worked measurement example is hypothetical.



