Will a KOMPLEMENT Drawer Clear Your PAX Door Hinges?

Original explanatory wardrobe diagram shows a hinge body beside a drawer path and an open door, distinguishing mounting-position conflicts from front pull-out clearance.

Result — Conditional. A drawer can match a PAX frame’s width and depth but still conflict with a hinged door. Check the exact drawer article, frame height, door and hinge positions in the matching instructions and planner before choosing the drawer’s vertical location.

Original explanatory wardrobe diagram shows a hinge body beside a drawer path and an open door, distinguishing mounting-position conflicts from front pull-out clearance.
Original Will It Fit Here explanatory diagram, not to scale. It illustrates the measurements discussed below; it is not a product photograph or a firsthand fit test.

Dimensions: frame size is not drawer size

IKEA’s US KOMPLEMENT article 102.463.08 fits the named 20 × 23 inch PAX frame family. Its product page separately lists the frame references, drawer body and pull-out depth. These are different measurements. Do not order a drawer for an unrelated wardrobe merely because its outer width seems close.

102.463.08 measurement Listed US dimension Use
Frame width/depth reference 19⅝ × 22⅞ in Select the matching PAX frame
Drawer body W × D × H 16⅞ × 22⅜ × 6¼ in Understand the actual drawer envelope
Maximum pull-out depth 16½ in Plan the room in front
Hinge locations Depend on frame and door Reserve the matching attachment positions

Map the occupied holes before installing runners

Record the frame height and article, door type, hinge set and drawer article. Use the current PAX planning tools and the assembly guides for that combination. Mark the holes required by the hinges before assigning drawer levels. A hole that is physically present is not automatically available for a runner.

IKEA’s Norwegian support page illustrates why frame height matters: its 236 cm PAX example uses four hinges, while its 201 cm example uses three and includes different left/right middle positions. These regional examples demonstrate the need to match instructions; do not transplant their hole numbers blindly to another frame generation or market.

Check movement with the actual door open

At each proposed drawer level, compare the hinge body and its movement with the drawer side, front and runner path. Open the door to the position required by the instructions and check whether a neighbouring wall, handle or another door prevents that movement. A drawer that clears a hinge on an unrestricted showroom frame may not clear it beside your bedroom wall.

Do not solve a collision by omitting a hinge, moving it to an arbitrary hole or trimming the drawer. Re-plan the approved internal arrangement or choose a compatible component. Keep the door’s required support and the wardrobe’s securing instructions intact.

Include pull-out space in the room

The listed 16½-inch maximum pull-out depth is separate from the closed drawer depth. Check the actual front projection with the drawer open and include handles, your standing position and furniture opposite it. A bed can block useful access even when the wardrobe door opens.

Use removable tape on the floor to mark the intended open front. Then test a light cardboard drawer-height outline at the proposed level before loading clothes. This mock-up helps reveal a hinge collision but does not replace the planner’s compatibility or the assembly instructions.

Call the result a fit only after the correct article, available mounting positions, door movement and front access all pass. Frame-width compatibility is necessary, but it does not answer the hinge-clearance question by itself.

Before you decide

  • Match the exact PAX frame, height, door, hinges and drawer article.
  • Reserve the instructed hinge holes before choosing runner positions.
  • Check the drawer path with the door opened as required in its real location.
  • Retain all required hinges and allow useful pull-out space in front.

FAQ

Can I move a hinge to make room for a drawer?

Use only the positions and combinations allowed by the matching instructions; re-plan the interior if they conflict.

Does a matching frame width guarantee the drawer opens?

No. Hinges, door opening angle, neighbouring walls and front pull-out space can still block it.

Official sources and scope

Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.

Related fit guide