OXO 8-Cup Fit: 5 Essential Counter-and-Lid Checks

OXO 8-Cup fit: listed 13.5 by 10.5 by 7-inch dimensions and lid-access checks

Fit verdict: OXO 8-Cup fit needs a usable filling and brewing position as well as a storage space. The official listing for the 8-Cup Coffee Maker, SKU 8718800, gives dimensions of 13.5 × 10.5 × 7 inches. Verify the orientation of those dimensions against the exact unit or a labelled drawing before assigning height, width and depth to your counter plan.

OXO 8-Cup fit: listed 13.5 by 10.5 by 7-inch dimensions and lid-access checks
Original planning diagram, not to scale. This guide uses published specifications, not a firsthand product test.

Dimensions and conditions

Check Reference Planning consequence
Exact product 8-Cup Coffee Maker, 8718800 Do not substitute a different OXO brewer.
Listed dimensions 13.5 × 10.5 × 7 in Check axis labels before comparing your opening.
Cup arrangement Flip or remove the well cover as directed Test your own mug and serving routine.

Begin OXO 8-Cup fit with the actual counter opening

Measure the narrowest usable space rather than the nominal distance between cabinets. Include a low trim rail, backsplash, outlet cover and any sloping underside. Put each measurement on a sketch with arrows showing its direction. A dimension triplet without clear axis labels is not enough to decide which way the appliance faces. If you cannot verify orientation from the current official information, measure a display unit or request a labelled drawing before ordering for a tight recess.

Allow room to fill and open the brewer

The closed body is only a starting point. Check the space used when opening the lid, filling the reservoir and handling the brew basket. Reach matters as much as height: you should be able to pour and see what you are doing without striking the cabinet. Use an empty, unplugged unit for a placement trial. Do not plan to slide or lift an operating brewer containing hot liquid simply because it fits beneath a cabinet when closed.

Test the carafe and your regular mug

Trace the path of the carafe as you remove it and return it to its normal position. Nearby utensils and a cabinet side can block that movement even when the brewer itself has space. OXO describes a well cover that can be flipped for short mugs or removed for taller ones. Try the arrangement intended for your drinkware and follow the operating instructions. A generous counter footprint does not by itself establish mug clearance or permission to use any oversized vessel.

Choose a stable daily working position

Support the appliance on a suitable level counter and keep its operating area usable for the steps you repeat every morning. Check how the cord reaches the outlet without passing through a sink area, a cabinet door or the carafe path. Leave room to wipe spills and remove the parts that need routine cleaning. Where ventilation, electrical use or surface protection is concerned, follow the current manual rather than treating spare inches from a room sketch as manufacturer-approved clearance.

OXO 8-Cup fit: a worked fit example

Suppose the underside of your cabinet trim is 17 inches above the counter, while a measurement of your particular brewer with its lid fully open is 18 inches. The opening is one inch too low for that measured action, even if the closed appliance fits. These are hypothetical site and lid measurements; 18 inches is not an OXO published open-lid specification. A better location would let you complete the filling sequence safely. Confirm that location with the empty unit before making it the normal brewing position.

Before you decide: 5 checks

  1. Match the model and verify the orientation of the listed dimensions.
  2. Measure the lowest cabinet trim and the full usable counter area.
  3. Trial the lid, filling and basket access with an empty unplugged unit.
  4. Check the carafe path and the platform arrangement for your mug.
  5. Confirm support, cord routing and the current operating instructions.

FAQ

Does OXO 8-Cup fit follow from closed height alone?

No. Opening, filling and removing parts require their own checks against the space above and around the brewer.

Is the listed dimension order enough to label the axes?

Do not assume it is. Confirm the orientation for the exact unit before relying on a tight fit.

Can I move it while brewing to reach the lid?

Plan a working position that avoids moving an operating appliance with hot liquid, and follow the manual.

Related fit guides

Sources

Sources checked 4 November 2026. Specifications apply to the named version and market. Example spaces and calculations are illustrative planning guidance, not manufacturer clearance requirements. Recheck the exact model or current operator policy before buying, installing or travelling.