IKEA MITTZON Underframe Fit: 5 Top Checks

IKEA MITTZON Underframe fit diagram: exact frame article, 68 + 12 cm top, match the width

Fit verdict: The IKEA MITTZON underframe 505.279.24 is designed for specified complete top combinations, not any board that shares a nominal desk width. IKEA’s Australian page pairs this 80 cm-depth frame with MITTZON tops 120, 140 or 160 cm wide and 68 cm deep, plus the matching 12 cm-deep plug-in module.

This guide uses the Australian white, non-electric underframe article 505.279.24. Other depths, electric frames and regional article numbers require their own documents. The same current page also lists UTMANING 120 × 80 or 160 × 80 cm tops as gaming-desk combinations. An unlisted custom top is not approved merely because it spans the frame.

IKEA MITTZON Underframe fit diagram showing exact frame article, 68 + 12 cm top, match the width
Original measurement diagram, not to scale. It illustrates the checks rather than a firsthand product test.

Dimensions and conditions

Check Official reference What to verify
Underframe identity 505.279.24; 80 cm desk-depth version Confirm region and frame variant.
MITTZON top widths 120, 140 or 160 cm Choose the matching frame setting.
Main MITTZON top depth 68 cm This is one part of the complete top.
Rear plug-in module Matching width × 12 cm Include it in the listed desk combination.
Listed alternative UTMANING 120 × 80 or 160 × 80 cm Follow that exact combination’s instructions.

1. Read the IKEA MITTZON underframe article number

Start with the frame you actually own or plan to order. Save its regional product page and assembly document beside the top’s details so the two cannot be mixed with a superficially similar frame. Width adjustment within a product family does not establish that every mounting pattern or top depth is interchangeable. If a seller advertises only MITTZON legs, ask for the exact article identity before selecting a tabletop. Keep electric and non-electric frame instructions separate rather than borrowing a convenient measurement from another listing.

2. Account for the rear module in the complete footprint

A 68 cm-deep MITTZON main top and the specified 12 cm-deep module form the listed 80 cm-deep combination. Draw both pieces in your room plan rather than marking only the main writing surface. Include the intended wall position, cable access and objects behind the desk. Compare the complete footprint with the room in the same units. The module is a component of this documented combination, so do not silently replace it with an empty gap and assume the assembly remains equivalent.

3. Check assembly identity before checking monitor placement

Use the exact combination’s official assembly instructions to confirm the required parts and frame setting. Do not drill an unlisted board or improvise an attachment based on the visible frame width. If the intended top is custom, obtain a confirmed specification from IKEA or an appropriate furniture professional before treating it as compatible. After the supported desk combination is established, plan your chair, monitor and cable routes around the complete desk. A monitor arm or other clamp needs its own compatibility check and cannot be approved from the desk’s nominal width alone.

Before you decide: 5 checks

  1. Record IKEA MITTZON underframe article 505.279.24 and the Australian reference scope.
  2. Match the selected 120, 140 or 160 cm main-top width.
  3. Include the same-width 12 cm rear module in a MITTZON top combination.
  4. Verify every part against the exact assembly instructions before building.
  5. Mark the complete desk footprint and separately check accessories and cable access.

Keep a short IKEA MITTZON Underframe fit record with the exact product or service identity, the official rule you checked and the measurements from your own setup. Mark anything you could not verify as unresolved. Recheck the record if the product, accessories, route or surrounding space changes; an earlier fit result belongs to the configuration that was actually checked.

FAQ

Does IKEA MITTZON underframe accept any 140 cm tabletop?

The width alone does not establish that. Use a combination listed for the exact frame and follow its assembly documents.

Why is a listed 80 cm desk paired with a 68 cm main top?

The specified MITTZON combination also uses the matching 12 cm-deep rear plug-in module.

Can this guide establish compatibility for an electric MITTZON frame?

No. This scope is the non-electric Australian article 505.279.24; check the electric frame’s own article and instructions.

Related fit guides

Continue with IKEA LAGKAPTEN 200 Fit: 5 Centre-Leg Checks or browse Furniture fit guides. Check each item against its own specifications; a related guide does not establish this product’s compatibility.

Official sources

Sources checked 30 October 2026. Measurements and conditions are attributed above; room and packing checks are planning guidance. Recheck the current official instructions before purchase, installation or travel.