Fit verdict: An IKEA BEKVAM Rack can hold your intended spice bottles only if their bases fit the usable shelf and you can lift them past the retaining rail. The published outside depth is not the clear bottle-base depth. Measure the actual jars, including wide lids, before treating a narrow wall strip as a workable spice station.
The reference is the US BEKVÄM aspen spice rack, article 204.871.75. This guide uses its published outside dimensions and current assembly instructions. It does not assume that different jars have standard diameters or that the rack is approved for mounting on an arbitrary cabinet door.

Dimensions and conditions
| Check | Official reference | What to verify |
|---|---|---|
| Outside width | 15 3/4 in | The inner span is reduced by the side pieces. |
| Outside depth | 3 7/8 in | Measure the clear shelf area behind the front rail. |
| Outside height | 3 1/2 in | Bottle tops may extend above the rack body. |
| Bottle outline | Your actual base, shoulder and lid | A bottle’s stated volume does not establish these dimensions. |
| Wall fixing | Suitable screws and plugs; sold separately | Follow the wall-specific assembly requirements. |
1. Measure the IKEA BEKVAM Rack inside its sides
Use a ruler on the assembled shelf to record the usable width and depth. Compare the bottle base with that clear area rather than the overall product rectangle. A jar with a narrow base and wide shoulder may stand on the shelf yet press against the rail or neighboring bottles. Set out the actual selection in a row before deciding how many will fit. Keep enough access to grip the bottle you need without pushing another item toward the edge.
2. Reserve room above each bottle
Check the tallest cap and the movement needed to remove that bottle. The rack’s body height describes the woodwork, not the maximum height of the contents or the gap needed to lift a jar. If several racks will be stacked vertically, mark their positions on the wall with paper templates and include the complete bottle outlines. Test the lifting motion with an unfilled mock-up at a comfortable height before committing to a tightly spaced arrangement.
3. Check the proposed wall location
Review the current assembly sheet and choose fixings suitable for the actual wall. IKEA says wall screws are separate and warns that the rack must be securely anchored. Do not turn a wall-mounted storage product into a door-mounted accessory without a confirmed permitted method. Assess nearby door swings, cabinet handles and the path used to work at the counter. Keep the final position practical for the people using it rather than optimizing only the number of racks that can be drawn on the wall.
Before you decide: 5 checks
- Confirm aspen rack article 204.871.75 and the assembly sheet.
- Measure the usable inner shelf width and depth.
- Compare the widest base, shoulder and lid of every intended jar.
- Template the bottle tops and the full removal movement.
- Verify suitable wall fixings and nearby cabinet or door movement.
Keep a short IKEA BEKVAM Rack fit record with the exact product or service identity, the official rule you checked and the measurements from your own setup. Mark anything you could not verify as unresolved. Recheck the record if the product, accessories, route or surrounding space changes; an earlier fit result belongs to the configuration that was actually checked.
FAQ
Is IKEA BEKVAM Rack’s 3 7/8-inch depth all usable?
That is the published outside depth. Measure the actual clear shelf area and rail position before choosing bottle sizes.
Can I calculate jar capacity from bottle volume?
No. Two jars with the same volume can have different bases, shoulders and lids. Compare their outside shapes.
Can I place two racks directly above one another?
Only after checking the contents and removal movement. The rack-body height alone does not give the necessary vertical spacing.
Related fit guides
Continue with IKEA HEMNES Daybed Fit: 5 Mattress Checks or browse Furniture fit guides. Check each item against its own specifications; a related guide does not establish this product’s compatibility.
Official sources
- IKEA BEKVÄM 204.871.75 US dimensions and fixing information
- IKEA BEKVÄM official assembly instructions
Sources checked 29 October 2026. Measurements and conditions are attributed above; room and packing checks are planning guidance. Recheck the current official instructions before purchase, installation or travel.



