Fit verdict — Conditional. Kohler Verdera fit requires the rough opening for the exact cabinet suffix and clearance for the mirrored door. For K-99003-SCF, Kohler’s 8 October 2026 specification lists a 19⅝ × 28¼ × 3¹¹⁄₁₆-inch cutout (W × H × D). The nominal 20 × 30-inch face is not that opening. Do not use an older K-99003 or a lighted variant’s recess dimensions merely because its front size looks the same.

Kohler Verdera fit: scope
Kohler Verdera K-99003-SCF, US/Canada specification dated 2026-10-08. Other suffixes and lighted versions require their own documents.
Dimensions and conditions
| Check | Reference or condition | What it means |
|---|---|---|
| Nominal face | 20 × 30 in | Not the recess cutout. |
| SCF cutout width | 19⅝ in / 499 mm | Use the current suffix-specific specification. |
| SCF cutout height | 28¼ in / 718 mm | Check the framed opening at several points. |
| SCF cutout depth | 3¹¹⁄₁₆ in / 94 mm | Wall depth must be usable, not just nominal stud depth. |
| Door clearance | 108° swing; minimum 3 in / 76 mm from obstacles | Check faucet, lighting and neighbouring wall with the chosen hinge direction. |
1. Read the complete Kohler Verdera model label
Keep the suffix with the drawing and the cabinet order. A family name and front dimensions are not enough to identify the wall opening. Compare the dated technical sheet with the product actually supplied before marking the wall. A similar-looking older recess can be unsuitable even when the new mirror covers its edges. Do not treat a larger hole as automatically acceptable: the cabinet still needs the required framing and support.
2. Assess the usable framed cavity
Measure width and height at multiple positions and check the depth available after finishes and obstructions are considered. Record whether the opening is square rather than averaging a narrow top and wide bottom. Have concealed services and the required framing assessed before any cutting. The specification calls for support from framing studs; a successful empty-space comparison does not establish that a cabinet can be secured to the existing wall arrangement.
3. Trace the door independently of the recess
Choose the permitted hinge direction, then mark the intended mirror position and opening arc on a room sketch. Check the faucet, light, adjacent wall and any shelf beside it. A cabinet can fit the cavity while its door meets a projecting tap or a nearby sconce. Keep the stated obstacle clearance in the plan and use the actual installation instructions. If a full opening test changes the cabinet height, repeat the recess and framing checks at that position.
Before you decide: 5 checks
- Verify K-99003-SCF rather than only the Verdera family name.
- Use the current suffix-specific cutout dimensions.
- Measure the framed cavity at several points and check concealed obstructions.
- Confirm required support and the matching installation method.
- Check hinge direction, the door arc and obstacle clearance before marking a final position.
FAQ
Is the 20 × 30-inch label the rough opening?
No. It describes the nominal face. Use the cutout values for the exact suffix.
Can an older K-99003 drawing be reused?
Not automatically. This guide deliberately uses the current SCF sheet; variant and revision differences matter.
Does a larger existing hole guarantee easy replacement?
No. The support, fastening arrangement, finished coverage and permitted opening still need assessment.
Official sources and scope
Checked on 26 October 2026. The cited product, variant and region control. Follow the matching current instructions. The measurement workflow is editorial guidance; no firsthand installation or universal fit is claimed.



