Result — Conditional. Match the TROFAST frame and box articles, then check the intended rim-to-rail orientation. The width printed for a loose box cannot be compared blindly with the frame’s outside width; the official combination can use different axis orientations.

The apparent width mismatch needs an orientation check
IKEA’s US combination 995.732.31 pairs frame 505.160.63 with storage box 505.820.91 and two compartment trays. The frame is listed as 13⅜ inches wide, 17⅜ inches deep and 22 inches high. The box’s own page lists 16½ inches wide, 11¾ inches deep and 9 inches high. Those labels describe the separate products in their displayed orientations; they do not show an impossible combination.
| Component | Official listed dimensions | Fit reference |
|---|---|---|
| Frame 505.160.63 | 13⅜ W × 17⅜ D × 22 H in | Outer frame, not the clear rail opening |
| Box 505.820.91 | 16½ W × 11¾ D × 9 H in | Orient the supported rim to the rails |
| Combination 995.732.31 | Named frame, box and trays | Confirmed component pairing |
| Guide rails | Included with this combination | Install in the specified positions |
Read the component list before measuring
Record the frame article from its label or receipt and obtain its assembly guide. A secondhand storage unit advertised as “TROFAST-style” may have another rail profile. Confirm that the box appears in the intended system or combination, rather than deciding from a similar colour or rounded rim.
Measure the box’s full outer rim in both directions, then compare its intended sliding direction with the frame illustration. The rim is the feature that must be supported; the smaller bottom of a tapered box cannot establish rail fit.
Inspect both rails and the usable height
Check that a matching pair of rails is present, intact and installed at the same intended level. A missing rail, reversed part or uneven installation can make a correct box seem too tight. Follow the frame’s fastening sequence rather than spreading its sides to force a box through.
Check the vertical space below the next tray, rail or shelf against the complete 9-inch-high box. If a lid is used, include the actual lid and intended opening movement. Overfilled contents may hit the structure above even when the empty box slides correctly.
Test normal use without forcing the rim
With the frame assembled and secured as instructed, test the empty compatible box in its proper orientation. It should follow the intended rails without twisting or bending the rim to get past a fastener. Examine the insertion route and the space needed to pull and carry the box away.
Do not treat the storage frame as a climbing step. Keep its installation and use within IKEA’s instructions. This particular box is listed for indoor use and is not approved for food contact; rail compatibility does not change those use limits.
For a useful decision, record three separate results: the article pairing matches, the rim engages the intended rails, and the full box can be inserted and removed in the room. A pass on the frame’s exterior footprint alone answers none of the other two questions.
Before you decide
- Record the exact frame and box articles.
- Use the official component pairing and intended orientation.
- Inspect both rails, rim support and vertical clearance including a lid.
- Test empty insertion and removal after correct assembly and securing.
FAQ
Why is the box listed wider than this frame?
The separate product pages use different displayed orientations. Follow the official combination and the intended rim-to-rail direction.
Can I use the smaller box base to judge rail fit?
No. Compare the supported outer rim and the rail interface.
Official sources and scope
Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.
- IKEA US TROFAST combination and component list
- IKEA US box 505.820.91 dimensions
- IKEA matching frame assembly guide



