Result — Conditional. Google TV Streamer (4K) is a separate tabletop box, not the thin Chromecast dongle. Its 161.56 × 75.6 × 26.67 mm body needs additional space for HDMI, power and any Ethernet connection without pushing the plugs against furniture.

Identify the box before using Chromecast measurements
Google lists Google TV Streamer (4K) separately from Chromecast with Google TV. Similar names do not establish an identical envelope or mounting arrangement. Read the model name on the device or packaging before ordering a shelf or reusing a small dongle bracket.
The official Streamer specification gives the three body dimensions below. Keep the maker’s axis labels when making a paper outline; do not assume that the longest dimension must point from the front to the back of your shelf. Mark the actual connector side after inspecting the unit.
| Streamer (4K) item | Published specification | Planning implication |
|---|---|---|
| Body length | 161.56 mm / 6.36 in | Draw the complete outline |
| Body width | 75.6 mm / 2.97 in | Check usable support width |
| Body height | 26.67 mm / 1.05 in | Allow the case to sit normally |
| Video connection | HDMI 2.1 Type A; cable sold separately | Include your actual plug and bend |
| Other connections | USB-C; RJ45 Ethernet | Include power and any wired network lead |
Measure a connected sample, not only the empty shelf
Measure the clear shelf between its side walls, rear panel and any front lip. Include a door hinge or cable hole that intrudes into that space. Set a paper outline in the intended orientation and check that the whole device can be supported. Then connect the actual cables while the device remains accessible.
Measure from the case to the furthest point reached by each plug and its naturally routed cable. A cable’s moulded strain relief does not fold flat. If you use a right-angle cable, inspect its direction: a plug that turns toward another occupied socket may create a new collision. Do not infer a standard bend allowance from the HDMI connector name.
Work through a close shelf
Suppose a hypothetical opening is 170 mm across the dimension occupied by the 161.56 mm body length. The difference is 8.44 mm total. That arithmetic confirms only a nominal body comparison. It does not provide space for a connector on that axis, a side wall, your fingers or an installation movement. Test the assembled arrangement before calling it a fit.
A removable rear panel can change the geometry, but only use furniture in a configuration its maker permits. Route cables through an existing suitable opening without pinching them when doors or the TV mount move.
Check power and future access
Google specifies a 5 V DC, 1.5 A supply and includes a power supply. Use the matching power arrangement rather than assuming an available TV USB socket is equivalent. Leave the connections accessible so you can remove the device without pulling on a lead.
Finish with the shelf in its normal viewing configuration. Check that the TV stand, other electronics and any closing door do not press on the box or trap cables. A loose case that fits before wiring can become a no-fit assembly after its leads are attached.
Before you decide
- Confirm Google TV Streamer (4K), rather than a Chromecast variant.
- Mark the body outline using the published axes.
- Measure the connected HDMI, power and optional Ethernet envelope.
- Check normal support, cable movement and access with the furniture closed.
FAQ
Will a Chromecast bracket fit the Streamer?
Do not assume it. The body and connection arrangement differ; use an accessory explicitly specified for your model.
Can I budget only the 26.67 mm height?
That is the body height. Support, connected cables and the actual installation route still need checks.
Official sources and scope
Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.



