Quick answer: A round duct and rectangular hood outlet can connect only when the hood’s instructions approve the duct size, transition and complete route. Similar cross-sectional area does not establish equivalent airflow or installation suitability. Measure the transition’s body and connection space as well as its end openings.

Identify the outlet and the permitted route
Record the exact hood model, exhaust direction, outlet shape and required duct size. An existing duct above the cabinet may differ from the opening visible at the hood. Confirm the whole route and its termination, not just the first adapter.
Broan-NuTone sells a model 877 transition described as 6 in round to 3¼ × 10 in rectangular. Its existence is evidence that this particular fitting has those ends, not approval to use it with every hood. Check the hood manual and the transition’s current drawing together.
Understand what the area comparison can—and cannot—tell you
| Ideal nominal opening | Arithmetic area |
|---|---|
| 3¼ × 10 in rectangle | 32.5 square inches |
| 6 in diameter circle | π × 3² ≈ 28.27 square inches |
The circle’s calculated area is about 13% smaller. Actual internal dimensions, transition losses, elbows, duct length and the hood’s design also matter. These nominal areas are not a pressure-loss calculation, a ventilation design or a basis for reducing the duct specified by the manufacturer.
Reserve the adapter’s complete envelope
Get the dimensional drawing and measure between cabinet structures, the ceiling or soffit and other services. Include the fittings’ required engagement and the permitted route of the following elbow. A transition whose ends match can still be too tall to connect properly.
For an illustrative 7 in-high fitting body in a 5 in clear space, the body alone is 2 in too tall before any connection allowance is considered. Do not flatten a transition, crush a duct or omit a required damper to resolve that conflict.
- Hood-approved exhaust direction, size and material.
- Correct transition part and both mating ends.
- Body dimensions plus connection/assembly space.
- Route, elbows and termination assessed as the manual requires.
- Damper movement and service access unobstructed.
Common questions
Does equal area mean equal performance? No. Shape and the complete system affect airflow.
Can any ductless hood be connected to a duct? Only if that exact product supports and is configured for ducted operation.
Does an over-range microwave use the same route? Check its own installation document. See our over-range microwave fit guide.
Official source and limits
Checked October 20, 2026: Broan-NuTone 877 transition specification. Use the hood’s exact installation manual and qualified ventilation help where needed. The 7 in fitting example is hypothetical; no firsthand airflow or installation test is claimed.



