IDANAS Nightstand Fit can fail even when the table slides into the gap beside your mattress. The bed frame, drawer movement and charging cables can each change the usable space. This guide covers IKEA’s white IDANÄS nightstand, US article 904.588.10, with published measurements and hypothetical examples that help you distinguish a tidy-looking layout from one you can actually use.
IDANAS Nightstand Fit: the quick verdict
The table is a potential fit when the complete body clears the bed frame and wall, the drawer opens without striking bedding or furniture, and the top is reachable from your normal sleeping position. Compare interior storage separately. None of the example gaps below is a required safety clearance or an accessibility approval.

| Measurement | Published dimension |
|---|---|
| Overall width | 18½ inches |
| Overall depth | 15¾ inches |
| Overall height | 26¾ inches |
| Drawer interior width × depth | 14⅛ × 11¾ inches |
| Drawer interior height | 7⅞ inches |
| Height under furniture | 6¾ inches |
1. Find the narrowest bedside width
Measure from the outer bed frame, not the soft edge of the mattress. Include projecting upholstery, a headboard wing and the wall’s baseboard. Repeat at the floor and tabletop height. A wall may be clear above its trim but narrower exactly where the nightstand legs need to sit.
A hypothetical 21-inch gap minus the 18½-inch table width leaves 2½ inches total. That total cannot be counted twice as a generous gap on each side. For IDANAS Nightstand Fit, decide how much belongs beside the bed and how much the wall or curtain requires, then reproduce that arrangement with a full-size floor outline.
2. Compare the top with your actual bed height
Measure the finished mattress top with the bedding you normally use. If it is hypothetically 29 inches above the floor, it is 2¼ inches above this table’s top. That difference is an observation, not a reason by itself to approve or reject the nightstand.
Place a temporary surface at the intended height and try reaching for a phone or water glass from your normal position. Keep the objects away from the edge during this rehearsal. A tall mattress, wide frame ledge or deep pillow arrangement can make a visually matched table awkward to reach.
3. Separate drawer capacity from opening travel
The published drawer interior helps select organizers, but its depth does not tell you the drawer’s full extension distance. Measure the actual open position and the space your hand needs to access the back. Include the knob and any quilt hanging into the drawer path.
For a concrete storage example, a hypothetical rigid organizer measuring 14 by 11½ inches is smaller than the stated interior footprint by only ⅛ inch in width and ¼ inch in depth. That tight arithmetic does not guarantee insertion past the opening. Rounded corners, a projecting lid and manufacturing variation can matter, so verify the real box before buying multiples.
4. Trace cables without trapping them
IKEA provides an opening in the back for cables. IDANAS Nightstand Fit still requires checking your outlet location, plug shape and cable bend. A cable hole does not prove that a bulky charger can sit between the furniture and wall, or that a cord can travel safely through a moving drawer.
Route each lead in the proposed configuration and check that the table can remain in position without crushing it. Avoid treating a stretched cord as usable length. Retain access to the outlet and follow the electrical device’s instructions rather than relying on furniture dimensions for an electrical installation decision.
5. Check cleaning and surrounding furniture
The 6¾-inch published under-furniture height is only a starting point for cleaning access. Leg spacing and supporting parts may limit the route of a vacuum head or cleaning robot. Compare the actual lowest passage, not just the nominal height, before counting on automated cleaning underneath.
Finish the IDANAS Nightstand Fit test with the bedroom door, wardrobe and nearby drawers open. Sit on the bed edge and get up normally.
Before-you-buy checklist
- Measure the narrowest gap beside the complete bed frame.
- Compare tabletop height with the finished mattress.
- Check drawer opening travel and organizer insertion.
- Test plug and cable routing at the actual outlet.
- Rehearse cleaning, standing up and neighboring doors.
FAQ
Does a 19-inch gap work?
It leaves only ½ inch total against the listed width. Confirm the actual item, wall trim and bed projection before considering it a reliable fit.
Can I size a basket from the nightstand’s exterior?
No. Measure the open shelf and its access opening directly; the external width includes structural parts.
What is the final IDANAS Nightstand Fit decision?
Approve the location only after checking reach, drawer use and cables in the same layout. A passing footprint measurement answers just one part of the question.
Related fit guides
Compare dresser drawer clearance beside a bed and BRIMNES headboard fit when planning the rest of the bedside area.
Official source
Checked November 5, 2026: IKEA IDANÄS nightstand product details and measurements. Verify the selected article and its current assembly instructions.



