Will a NOCO GB40 Fit Safely in Your Glovebox?

Original explanatory diagram of a GB40 body inside a larger packed envelope and a glovebox lid sweep; it distinguishes body dimensions from accessories and storage conditions.

Result — Conditional. The current GB40 body is compact, but the compartment must also hold the clamps and bag without crushing them and remain within NOCO’s storage-temperature limits. A glovebox that closes does not establish suitable year-round storage.

Original explanatory diagram of a GB40 body inside a larger packed envelope and a glovebox lid sweep; it distinguishes body dimensions from accessories and storage conditions.
Original Will It Fit Here explanatory diagram, not to scale. It illustrates the measurements discussed below; it is not a product photograph or a firsthand fit test.

Use product size, not shipping-box size

NOCO’s current GB40 specifications give height 3.16 in (80.3 mm), width 7.72 in (196 mm) and depth 1.71 in (43.5 mm), with a product weight of 2.45 lb (1.11 kg). These are the maker’s axis labels for the device. They are not the dimensions of a packed storage case. The supplied clamps, cable and bag need their own arrangement.

Measure the opening and the compartment behind it

Empty the glovebox while parked and open it normally. Measure the narrowest access opening and the usable interior at several depths. Include hinge arms, the latch, a sloping rear wall and the space the lid occupies as it closes. A wide cavity behind a small opening can still refuse a rigid device. Do not dismantle the glovebox or force it beyond its normal stops for a fit check.

Measurement GB40 reference or action
Body envelope 196 × 80.3 × 43.5 mm, using the cited axes
Packed envelope Measure your clamps, cable and chosen case together
Opening Check the actual insertion orientation
Closing movement Ensure no latch or hinge pinches the contents
Temperature Use the matching NOCO guide; do not infer from cabin air when driving

For a hypothetical 190 mm straight opening, the device’s 196 mm width is 6 mm greater. That comparison alone does not prove it can turn through the opening: the other two dimensions and the space needed to rotate matter. Make a light cardboard mock-up of the complete packed envelope, then test it gently before putting a battery device into a tight cavity.

Temperature can change the answer to no

NOCO’s support guidance says Boost storage must not be below −20°C (−4°F) or above 50°C (122°F). The linked user guide adds a 0–25°C daily-average storage condition. Follow the guide supplied for your revision. A parked vehicle can have a very different temperature from the cabin after air conditioning starts; physical clearance cannot waive those conditions.

If you cannot keep the chosen compartment within the specified conditions, choose another permitted storage location and bring the unit when needed. Keep it dry and secure, with the clamps protected as instructed. This is a storage fit check, not a recommendation to charge or operate the jump starter inside a closed glovebox.

Keep emergency access practical

Check that you can retrieve the bag without unloading fragile items or moving the vehicle. Keep the instructions accessible and inspect the device in accordance with the manual. A compartment suitable for the bare unit may become unsuitable after a protective case is added, so repeat the complete-envelope check when the storage arrangement changes.

Before you decide

  • Confirm the GB40 revision and current matching guide.
  • Measure body, clamps, bag, access opening and lid movement.
  • Confirm storage temperature rather than relying on geometric fit.
  • Store securely and leave the unit accessible without pinched cables.

FAQ

Can I use the shipping carton dimensions?

No. Measure the complete storage arrangement you actually plan to carry.

Does fitting the device prove a glovebox is safe in summer?

No. The storage conditions still apply while the vehicle is parked.

Official sources and scope

Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.

Related fit guide