Thule OutPace Fit: 5 Essential Folded-Rack Storage Checks

Thule OutPace Fit diagram showing the detached rack’s 30-inch width, 24-inch length, and 10-inch folded height

Fit verdict: Thule OutPace Fit for off-car storage requires a clear path for a folded rack measuring 24 × 30 × 10 inches, in the manufacturer’s length × width × height order. Those figures cover the US two-bike model 9012500. They do not describe the space behind a car with the rack mounted and tilted upward, and they do not include bicycles.

Thule OutPace Fit diagram showing the detached rack’s 30-inch width, 24-inch length, and 10-inch folded height
Original planning illustration, not to scale. Specifications and hypothetical examples are distinguished in the text.

This guide uses published specifications and planning calculations, not a firsthand product test. Examples are hypothetical.

Dimensions and conditions

Measurement Published specification
Model covered US Thule OutPace 2-bike, 9012500
Folded dimensions, L × W × H 24 × 30 × 10 in
Unfolded dimensions, L × W × H 32 × 48 × 17 in
Rack weight 29 lb
Bike load limits 110 lb total; 55 lb per bike
Published receiver compatibility 1.25 in and 2 in; follow fitting instructions

1. Identify the folded configuration

Begin Thule OutPace Fit with the US model number, not photographs of a similarly named European towball carrier. Folding for off-car storage and tilting upward on a vehicle are different arrangements. Use Thule’s instructions to put the rack into the configuration represented by the folded dimensions. Keep straps and movable pieces secured as instructed. A loose component can make the practical storage outline larger or snag while you carry the rack past shelves. Include a storage bag separately if you intend to use one.

2. Measure the opening before the compartment

For a garage cabinet, measure between the fully opened doors and their hinges. For a trunk, check the clear entrance above the sill and between trim. Then measure the interior. Thule OutPace Fit can fail at the entrance even when the rack would fit farther inside. Make a lightweight 24-by-30-by-10-inch cardboard mock-up to test the path. If rotating it, check both the first corner entering and the opposite corner sweeping past the opening. A diagonal measurement alone does not describe that movement.

3. Verify support and lifting height

A shelf needs adequate depth, an appropriate load rating, and a stable support arrangement. The published 29-pound weight is the empty rack, so add any bag or accessories you store with it when reviewing the shelf rating. Avoid balancing the rack on a narrow edge merely because that orientation minimizes the footprint. Check the permitted storage position in the instructions or with Thule. Thule OutPace Fit should also allow you to grasp its carrying handle without reaching around a sharp shelf edge or lifting awkwardly above shoulder height.

4. Keep the access route usable

A storage spot that works only with every other item removed can become frustrating after each trip. Measure the route with normal garage items, parked vehicles, and cabinet doors in their everyday positions. Reserve enough room to approach the handle and move the rack out without scraping the car. Thule OutPace Fit also includes the loading step if the folded rack travels inside the vehicle: the trunk must still close and the rack must be secured as cargo. Do not assume it can rest loose beside passengers or fragile luggage.

5. Separate storage fit from mounted clearance

When the rack returns to the hitch, repeat the vehicle checks with the actual receiver, bumper, spare tire, and exhaust arrangement. The 32-inch unfolded length is a product dimension, not a stated distance from your particular rear bumper. Likewise, the folded 10-inch height is not the distance added behind the car in the tilted-up position. Measure actual installed projection before parking near a wall or closing a garage door. Bike loading requires its own compatibility review, including individual bicycle weight, wheelbase, tires, and the vehicle and hitch limits.

Thule OutPace Fit: a worked example

Imagine a cabinet interior 32 inches wide, 26 inches deep, and 12 inches high. In the listed folded orientation, the dimensional allowance is 32 − 30 = 2 inches across, 26 − 24 = 2 inches front to back, and 12 − 10 = 2 inches vertically. However, suppose hinges reduce the door opening to 29 inches. Straight insertion with the 30-inch side across fails by 1 inch. This Thule OutPace Fit example remains unresolved until a full-size mock-up proves an alternative route. Even a successful route needs suitable support, a verified storage position, and hand access; the two-inch allowances are arithmetic results, not manufacturer-required clearances.

Before you decide

  • Confirm US model 9012500 and the fully folded state.
  • Measure the entrance and the space beyond it separately.
  • Check support capacity for the rack plus stored accessories.
  • Leave a workable carrying route and accessible handle.
  • Recheck mounted projection and cargo security independently.

FAQ

Are folded dimensions the same as its parked-on-car footprint?

No. Thule OutPace Fit for detached storage uses the compact folded dimensions. The tilted-up position on a hitch has a different relationship to the bumper and garage door.

Can a storage bag be ignored when measuring?

Only if you will not use one. Fabric, seams, handles, and imperfect packing can add to the practical outline. Measure the bagged rack before committing to a tight cabinet.

Does fitting the rack in the garage prove it can carry my bikes?

No. Thule lists separate bicycle limits and fitting requirements. Check the exact bikes and the vehicle’s approved hitch arrangement before transport; empty-rack storage tells you nothing about frame or wheel compatibility.

Related fit guides

Measuring a mounted bike rack for garage parking and Matching a hitch receiver and rack shank.

Official sources

Specifications and instructions checked November 6, 2026. Confirm the exact model and current instructions before purchase or installation.