Result — Conditional. For the US EasyFold XT 2 model 903202, Thule lists 3-inch tires as standard and up to 4.7 inches with its specified XXL fatbike straps. A wider strap does not increase the 65 lb per-bike limit or the 1,300 mm wheelbase limit.

Separate tire capacity from bicycle capacity
A rack described as suitable for e-bikes still has several independent boundaries. Thule’s US 903202 page lists two bikes, 130 lb total load, 65 lb maximum per bike, 16–29 inch wheels and a 1,300 mm maximum wheelbase. The listed maximum tire width is 3 inches with standard equipment, or 4.7 inches with the named XXL fatbike wheel straps. Do not substitute figures from an Epos, another EasyFold generation or another regional version.
Dimensions and the useful pass/fail comparison
| 903202 criterion | Limit or condition | Example decision |
|---|---|---|
| One bicycle | 65 lb maximum | A 70 lb bike fails even if the second tray is empty |
| Two bicycles combined | 130 lb maximum | Both individual and total limits apply |
| Tire width | 3 in standard; 4.7 in with specified straps | A 4.5 in tire needs the approved accessory and all other checks |
| Wheelbase | 1,300 mm maximum | A 1,340 mm bike exceeds this published limit |
The example bicycles are hypothetical. Weigh the bike in the condition allowed by the bicycle and carrier instructions. If removing a battery is permitted, record the actual resulting transport weight; do not assume a catalogue weight excludes or includes the same accessories as your bike. Secure separately carried components as required.
Measure the tire and the attachment location
Measure the inflated tire’s widest part without compressing it. A sidewall label describes a nominal size, so it is a starting point rather than a guarantee about the complete wheel and strap path. Check wheel diameter and axle-centre wheelbase as well. Fenders, racks and frame shape can obstruct the intended attachment positions even when every headline dimension passes.
Thule specifically recommends a dealer fit test for unusual geometries or oversized frames. Its page also lists an adapter requirement for carbon frames. Identify the allowed clamping arrangement for the bicycle; do not clamp an unapproved component simply because it is reachable.
Include the vehicle and loading operation
The rack weighs 45 lb, which is additional to the bikes when checking the vehicle and receiver limits. Follow the vehicle-specific hitch installation instructions and the lowest applicable rating. The rack’s tilt feature does not promise that every tailgate clears every handlebar. Check the unloaded installation first, then the approved loaded arrangement without allowing contact. Store and use the included ramp as instructed; allow room to guide the bike rather than only enough space for the parked rack.
Before you decide
- Identify US model 903202 and its accessory kit.
- Weigh each carried bike and check combined load including vehicle limits.
- Measure inflated tire width, wheel diameter and wheelbase.
- Verify approved frame contact, ramp approach and hatch clearance.
FAQ
Do fatbike straps let me carry a heavier bike?
No. Strap reach changes the wheel retention arrangement, not the published weight rating.
Is total capacity enough if one bike exceeds 65 lb?
No. The individual bike limit must pass as well as the combined limit.
Official sources and scope
Specifications and guidance checked on 22 October 2026. The named model and region control; follow the matching current instructions for your product. Worked examples are identified as hypothetical.



