Will a Hitch Cargo Carrier Clear a Rear Spare Tire?

Conceptual hitch cargo carrier in horizontal and folded positions beside a rear spare tire, plus the CURT 18153 internal basket dimensions of 60 by 23 and three-quarter by five and one-half inches

Quick answer: A hitch cargo carrier can fit the receiver and still collide with a rear spare tire when folded. Check its loaded, unloaded and folded positions separately, using the actual hitch-pin location as the reference. A nominal 60 × 24 in basket also does not necessarily provide 60 × 24 in of usable internal floor.

Conceptual hitch cargo carrier in horizontal and folded positions beside a rear spare tire, plus the CURT 18153 internal basket dimensions of 60 by 23 and three-quarter by five and one-half inches
Original Will It Fit Here clearance sketch. Carrier movement is conceptual; no pin-to-tire clearance is specified by the drawing.

Use the basket’s internal dimensions

As a specific US-market example, CURT 18153 has a 2 in folding shank and nominal outside dimensions of 60 × 24 × 6 in. CURT lists the inside as 60 × 23¾ × 5½ in. The product page explicitly warns that rear-mounted spare tires may interfere with folding.

A rigid box exactly 24 in deep is therefore deeper than that listed 23¾ in internal floor by ¼ in, or 6.35 mm. Turning it only helps if the complete other orientation fits. Include handles, tapered walls and tie-down hardware instead of comparing a lid label alone.

Trace the folded position around the spare

On the parked vehicle, identify the receiver’s pin-hole centre and measure rearward to the furthest spare-tire or bumper surface. Compare the carrier drawing’s corresponding references. Do not compare a bumper measurement with a dimension taken from the end of the shank.

Check the carrier’s whole folding sweep as well as its final upright position. A basket may clear the tire when horizontal but contact it partway up. Rear doors and a swing-out spare carrier can add another moving envelope; opening the hatch above the basket does not prove access through every door position.

  • Correct receiver size and approved hitch/vehicle application.
  • Pin engagement, locking hardware and any anti-rattle parts installed as instructed.
  • Spare tire, bumper and exhaust separated from the complete carrier and load.
  • Folding mechanism and rear-door movement checked without forcing contact.
  • Ground clearance assessed for the actual load and route.

Keep the weight decision separate

The cited carrier’s 500 lb rating is not a 500 lb cargo allowance for every vehicle. Confirm the vehicle, hitch, carrier and any permitted adapter limits, including carrier weight. An extension changes the arrangement and can affect permitted capacity; do not add one merely to solve a spare-tire conflict without approval.

Secure the load using the manufacturer’s instructions and preserve required visibility and vehicle functions. Avoid hot exhaust contact. Our garage access guide can help with a separate stationary parking-space check.

Common questions

Does “universal part” guarantee vehicle fit? No. Receiver compatibility is only one of the necessary checks.

Can I leave cargo on while folding? Follow the exact carrier instructions. Do not infer permission from the presence of a folding joint.

Official source and scope

Checked October 20, 2026: CURT 18153 product specifications and installation-sheet link. Dimensions apply to that part only. No firsthand measurement, universal tire clearance or vehicle load approval is claimed.