Fit verdict: A DeLonghi Exhaust Hose layout works only when the supplied hose and correct adapters reach the permitted window outlet without an unsupported extension or obstructed route. De’Longhi’s UK FAQ describes a supplied hose of about four feet and advises against lengthening it. Check your exact model’s actual parts and instructions before choosing the room position.
This is a room-to-window reach guide. The UK FAQ’s approximate length is not a universal specification for every regional Pinguino model. The linked EM-series manual illustrates the short, unobstructed routing principle; use your own model manual for installation details, appliance clearances and the permitted window connection.

Dimensions and conditions
| Check | Official reference | What to verify |
|---|---|---|
| UK FAQ length reference | About 4 ft | Confirm the hose supplied with the exact appliance. |
| Added extension | Manufacturer advises against lengthening | Do not solve a reach failure by adding an unapproved tube. |
| Manual routing principle | Short route, without avoidable bends | The real path is longer than a straight-line floor measurement. |
| End connections | Correct unit and window adapters | Include the complete installed plug-in fittings. |
| Room position | Permitted appliance clearances and access | The hose reaching alone does not approve a tight corner. |
1. Measure the DeLonghi Exhaust Hose route in place
Identify the appliance outlet and the window-kit outlet before measuring between them. Hold a flexible tape along the path the installed hose would actually follow, including changes in height and direction. A horizontal distance from the appliance’s front edge to the window can miss the rear connector and the route around a curtain or radiator. Check the actual supplied hose without forcing its end fittings. Use the model’s instructions rather than treating an approximate FAQ length as a guaranteed usable reach.
2. Test the room layout without an extension
Mark a permitted appliance position near the chosen outlet and check how it affects walking space, curtains and furniture. De’Longhi warns against lengthening the exhaust hose because it can damage the product. If the original arrangement cannot reach, assess another permitted location or a different installation solution confirmed by the manufacturer. Do not assume a third-party extension is acceptable because its diameter appears to match. Keep the hose routing distinct from the appliance’s electrical-cord reach and its required airflow clearances.
3. Check adapters and normal window use
A hose route can pass the distance check and still fail where the adapter meets the window kit. Confirm the exact attachment parts and the permitted opening type in the model manual. Check the window handle, blind movement and the space needed to connect and remove the assembly. Follow the manufacturer’s arrangement for keeping the route short and avoiding bottlenecks; do not crush the hose behind furniture to hide it. Reassess the route after moving the appliance or rearranging the room.
Before you decide: 5 checks
- Record the exact Pinguino model and supplied hose/adapter set.
- Measure the actual routed path between both outlet connections.
- Confirm the model’s permitted hose arrangement and appliance clearances.
- Reject an unapproved extension as a fix for insufficient reach.
- Check window operation, curtains, walking space and removal access.
Keep a short DeLonghi Exhaust Hose fit record with the exact product or service identity, the official rule you checked and the measurements from your own setup. Mark anything you could not verify as unresolved. Recheck the record if the product, accessories, route or surrounding space changes; an earlier fit result belongs to the configuration that was actually checked.
FAQ
Can I extend a DeLonghi Exhaust Hose to reach another window?
De’Longhi’s cited FAQ advises against lengthening the exhaust hose because it can damage the product. Obtain model-specific guidance for another layout.
Does the four-foot reference apply to every country and model?
No universal claim is made here. It is an approximate UK FAQ reference; check the actual appliance, regional manual and supplied parts.
Can I use the straight-line gap to choose the position?
Measure the routed hose path and complete fittings instead. Height changes and bends can consume reach that a floor measurement misses.
Related fit guides
Continue with IKEA RUNNEN Fit: 5 Balcony-Threshold Checks or browse Rooms fit guides. Check each item against its own specifications; a related guide does not establish this product’s compatibility.
Official sources
- De’Longhi UK official exhaust-hose extension FAQ
- De’Longhi official Pinguino EM-series manual, exhaust routing
Sources checked 29 October 2026. Measurements and conditions are attributed above; room and packing checks are planning guidance. Recheck the current official instructions before purchase, installation or travel.



