Fit verdict — Conditional. Ninja CREAMi Deluxe pint fit in a freezer depends on the complete lidded tub, a level resting place and the path through the drawer or door opening. A 24 oz capacity describes contents, not outside clearance. SharkNinja lists 4.88 × 4.88 × 5.25 inches for accessory SKU XSKPNTLD2; use that only as a planning reference and confirm the actual lidded tub, especially if a drawer is a close match.

Ninja CREAMi Deluxe pint fit: scope
Original Deluxe NC500-family tubs and XSKPNTLD2. The current accessory title also mentions NC600, while descriptive compatibility copy says NC500 only. This freezer-space guide does not confirm machine compatibility for NC600 or another unverified model; ask Ninja about the exact tub and machine before buying.
Dimensions and conditions
| Check | Reference or condition | What it means |
|---|---|---|
| Capacity | 24 oz Deluxe tub | Volume is not a freezer-opening dimension. |
| Accessory reference | 4.88 × 4.88 × 5.25 in, L × W × H | XSKPNTLD2 listing; check the actual lidded assembly. |
| Preparation period | Freeze at least 24 hours | Official NC500 preparation guidance. |
| Resting position | Level, with the storage lid fitted | Check the matching preparation instructions. |
| Access | Drawer opening, rim and closing movement | An empty cavity can hide an entry restriction. |
1. Confirm your Ninja CREAMi Deluxe tub family
Read the machine label and accessory description together. Similar clear containers are not necessarily interchangeable at the machine interface. Keep the tub and its lid together when measuring; a replacement lid or different series can change the height. If a listing mixes generations, verify compatibility with SharkNinja rather than assuming the widest wording in the title settles the question. Record that identity beside the freezer measurement.
2. Measure with the drawer installed
Measure the route into the chosen spot, not a drawer removed from the freezer. Look for the upper rim, rail, fixed shelf and anything passing over the tub as the drawer closes. Measure the lidded container at its widest point. A footprint that fits the drawer bottom is useful only if the tub reaches that position in the required orientation and the door closes without pressing on the lid.
3. Reserve space for the full freezing period
Mark a level spot that remains available while the base freezes. Avoid a plan requiring the drawer to stay slightly open or the tub to balance on uneven packages. For several tubs, place their actual outlines on the usable shelf instead of dividing total freezer volume by the contents label. Provide a removal route for the first tub without tipping its neighbours. This geometry check does not replace the instructed preparation method.
Keep a Ninja CREAMi Deluxe tub and its matching lid together on the measurement sheet so that a container change does not silently invalidate the freezer plan.
Before you decide: 5 checks
- Identify machine, matching tub and storage lid.
- Measure the whole lidded tub instead of the 24 oz label.
- Check entry, overhead rim and closed-door space.
- Reserve level support for the full instructed freezing period.
- Resolve mixed-generation compatibility wording before buying an accessory.
FAQ
Does free volume greater than 24 oz establish a fit?
No. Shape, lidded height, level support and the entry opening matter.
Can listing dimensions replace measuring my tub?
Use them for screening. Check a close drawer with the actual lidded assembly rather than relying on a listing reference.
Are all CREAMi generations’ tubs interchangeable?
No. Verify the exact combination. The current accessory page contains mixed NC500/NC600 wording, so it is not a universal compatibility statement.
Official sources and scope
Checked on 26 October 2026. The cited product, variant and region control. Follow the matching current instructions. The measurement workflow is editorial guidance; no firsthand installation or universal fit is claimed.



